Tuesday, August 29, 2017

Tool32 Esys delete FSC from CIC/NBT F-Models

How to delete FSC from CIC or NBT F-Models? This is what you could try, with Tool32 fsc completely delete and with E-Sys new play.

This procedure is for NBT... here you go

- Configure tool32 for enet cable.
- Open tool32 and load nbt.prg
- find job named like this: steuern_delete_persistency_intel_plus_swt
- write SWT in the argument box
- double click on job
- now select gps_position_repair with argument 2 and nbt will be virginized and rebooted

FSC repair code import/activate with Ista/p or E-sys software

Edit: This turns out to only work for NBT

This is for CIC F models.... here you go

- Connect via FTP with CIC,
- remove:

- replace /mnt/HBpersistence/normal/generalPersistencyData_DiagnosticSWTController with Virgin one: generalPersistencyData_DiagnosticSWTController.zip

- Restart CIC.
- Done.

Friday, August 18, 2017

INPA & E-SYS coding options for BMW E F series

Popular basic coding options available for BMW E F series using  INPA & E-SYS software:

Navigation Coding
-DVD in Motion (CIC headunit only) Allows video to be playing while car is in motion
-Disable the Legal disclaimer on startup screen
-Navigation Map updates to 2014 North America maps
-Show Tire temp and pressure of each tire (F series)

Car Access System(CAS)
-Key fob to open/close mirrors( must have motorized mirrors)
-Set timeframe for mirrors to close with keyfob (2 seconds, 1 second or instant)
-enable the reverse mirror to tilt further down (see curb while parking)
-Key fob to open/close windows and sunroof
-Key fob to open/close trunk (must have motorized trunk lid)
-Enable cabin trunk button to open/close trunk lid (must have motorized trunk lid)
-Enable windows to close when door is open
-Komfort Eject (E series only)
-Enable doors to open automatically when car is turned off(no more double pull of handle)
-Disable seatbelt chime (Most models)
-Disable seatbelt butler
-Disable door Gong
-E93 coding of convertible top to allow open and close while moving
-Turn off TC-MSA ( f series only)

Heads-up Display (HUD)
-Enable Turn signal in HUD(some models work)
-Enable Entertainment and telephone list in HUD (some models work)

-Euro double blinking hazards (E series only)
-Allow Fog lights to stay on while flashing high beams
-Allow Fog lights to stay on with high beams
-Angel Eyes as Daytime running lights (production date 3/07 till present)
-Enable Fogs light as welcome lights (production date 3/07 till present)
-Disable sidemarkers ( those ugly yellow lights)
-Euro blinkers also known as double blink hazards
-Remove all bulb errors for aftermarker replacement lights
-Remove adaptive headlight errors
-Increase the Voltage on AE rings (only with LED rings)

Gauge Cluster (Kombi)
-Digital Readout of speed
-Disable Speed correction and show true reading
-Instrument cluster always on (like the M-models)
-Enable Shift suggestion (6MT only)

Windshield Coding
-Disable headlight washers( for those that like to have a clean car!)
-Windshield washers complete cycle (wiper blades dont stay up when you forget to shut them off)

-Retrofit Alarm coding
-Retrofit LCI tails coding
-Retrofit CIC coding
-Retrofit Bluetooth coding
-Retrofit side mirror coding
-Xenon retrofit coding
-Retrofit Aux coding
-Retrofit FRM module coding
-Sirius (SAT) activation
-BMW Apps activation
-Navigation map update with activation
-Clear error codes
-Injector coding
-Battery Registration coding
-Alpina B3 transmission Flash

BMW coding car list:
* E60, E61 od 03/2007
* E83 od 09/2006
* E81, E87 od 03/2007
* E90, E91, E92, E93 od 03/2007
* E70 (new model X5)
* R56 (new model MINI)
* From 1995 to 1998 (don’t need K-line).
* From 1998 to 03/2008 (all models)

* BMW F series, the new 1 Series, 3 Series, 5 Series, 7 Series , GT, X3

 HQ cables!! It must be with GREEN board, not WHITE!
BMW INPA K+DCAN cable for BMW E series
ENET cable with E-sys coding software for F series
(dcan cable works with INPA software; enet cable runs with E-sys program)

(fixed) ICOM A2 emulator system red indicator flash

Before go deep into the topic today, let’s check the ICOM A and ICOM B module indicator and meanings.

It is not different to see that if the Red LED indicator of either ICOM A or ICOM B emulator flashes, the Rheingold ISTA-D ISTA-P software will report error and fail to communicate with vehicle.
Problem& Symptom:
BMW ICOM A2+B+C diagnostic system A2 module red indicator blinking when connected to vehicle with LAN cable.

2 solutions provided by experienced BMW ICOM diagnostic system experts:
DISCLAIMER: We are not responsible for the damage.

1-rehot hot air gun this IC
2- Replace or change new one if necessary
3-The problem is the IC

Fix the ICOM A2 emulator firmware follow the PCB board displayed below:
The pulse generator to buy on auctions

white wire=the line to the WiFi antenna.
Others all marked in the PCB board

Wednesday, August 9, 2017

How to delete "Lifetime" FSC with Rheingold/ Esys

Is it possible to delete "Lifetime" FSC?
Yes, its possible. There must be a way to delete so called lifetime maps FSC code from NBT and return to normal behaviour of updates.

Just E-sys to generate a working code for any other region.
Insert map of other region, enter code, you don't even have to wait for upload to finish.
Insert maps from region you use and enter code for that particular map update.
CIC/NBT in general can only store single code.

For f-series, just read fsd with esys check en of FSC, lifetime is AD7Q Also upgrade index is FF

For E series, fstool.

If someone doesn't have functional fstool (for E-series), it's even easier to download data03 file from /mnt/hbdebug/. Code is the last 20 characters of the file, and if the last 4 are AD7Q it is the lifetime code.

And the easiest way to change it with the tool is directly in Rheingold.

This method work. I removed the lifetime fsc code.
But the cic doesnt update, usb and dvd.

src: http://blog.eobdtool.co.uk/rheingold-esys-delete-lifetime-fsc/